When dealing with heavy equipment and other types of industrial machinery, it is in everyone’s best interest to keep the hydraulic hoses in tip-top shape. These hoses act as the circulatory system for any machine they are in. When one suffers damage or fails, however, then it is time for Hydraulic Hoses Repair in Chicago. Here are some tips on how to get this done.
Step One
The source of the leak must be identified. This can be easy if the leak is a large one, because the pressurized fluids, most typically oil, will spewing out in great quantity. However, if the leak is a small one, it can be rather difficult to locate. This is because the hoses are generally wound tightly throughout the machine and are often laying on top of each other. The area where the leak is noticeable should be cleaned and dried. The system must then be pressurized so that the source of the fluid can be located. Make sure to don safety glasses before this is done.
Step Two
Once the leak is located, the system must be depressurized. All pumps should be discharged, and the accumulator should be shut off so that fluids do not begin to spray again.
Step Three
If the problem is something as simple as a loose nut, the nut can easily be tightened, and the system checked again. Re-pressurize the system and see if this procedure solves the problem. If this does not solve the problem, replacing the hose may be necessary.
Step Four
Unfortunately, if the hoses are worn or are suffering from cracks, they cannot undergo Hydraulic Hoses Repair in Chicago. They must be completely replaced. This is to ensure the safety of not only the machine but also the safety of the machine operator and those who may be nearby.
Even if the hoses cannot be repaired, an experienced company such as Miller Hydraulic Service Inc can easily replace the hydraulic hose or hoses. It is best to have the professionals do this so that nothing is missed. They have the safety of everyone at the forefront of their work.
