If a homeowner has completed a home improvement project or a home or yard cleanout, they are going to have a significant amount of waste. If there is any metal in the waste pile, the homeowner should understand that it cannot be tossed out with the rest of the trash. The metal can contaminate the soil making it dangerous to put in a landfill.
There are some recycle centers who will pay the homeowner for their metal because it is a natural resource. Before heading to the recycling center, the homeowner should know a few things about Recycling Metals in CT.
When gathering metal, the homeowner should wear long sleeves, long pants, gloves, and eye protection. If the metal is jagged with sharp edges or rusty, it can result in a cut that would require a tetanus shot. If the piece of metal is very large, the homeowner should use a metal cutter to break it down and make it more manageable to move.
Separate the Metals
Most recycling centers will require that the metals be separated. This is also the best way for the homeowner to get the maximum payment for their metal. The metal should be separated as follows.
If there are any harmful chemicals on the outside of the metal, the recycle company won’t take it. The metal would need to be disposed of in the same way that hazardous waste is.
Keep the Metal Stored
If the homeowner is storing their metal until they have enough to recycle, they should store it in a covered area away from the elements. If the metal is left under a blanket of snow, it can break down. If the homeowner is planning to store the metal for a day or two, there would be no reason to keep it covered.
Contact Various Recycling Companies
Before recycling the metal, the homeowner should call a few companies to see who is will to pay the most for the metal. One reputable company that pays the highest prices around is Calamari Recycling Co Inc.
Recycling Metals CT is a good way for a homeowner to get rid of metal that they don’t need and to make a bit of money at the same time. For more information, Browse website.